easy website maker
Mobirise

Choose the product

Mobirise

MAX PROTECTION +

MAX PROTECTION + is a repellent hydro-oil sealer that uses the latest nanotechnology for natural rock surfaces in its formulation. Its high performance creates an invisible layer of protection (no color change of materials), forming a chemical barrier ensuring a high yield and longer durability in the substrate of treated materials.

Mobirise

INSIDE MAX 500

INSIDE MAX 500 is a two-component water repellent suitable for the treatment of granites, marbles and other natural stones. It enhances color and luster and corrects micro-cracks, ensuring a permanent wet effect. It does not create a layer and has high resistance to ultraviolet rays.

MAX PROTECTION +

MAX PROTECTION + is a repellent hydro-oil sealer that uses the latest nanotechnology for natural rock surfaces in its formulation. Its high performance creates an invisible layer of protection (no color change of materials), forming a chemical barrier ensuring a high yield and longer durability in the substrate of treated materials.
Its main objective is to maximize resistance to staining agents such as water, oil, ketchup, wine, olive oil, etc. The use is indicated in granites, quartzites, marbles (carbonate rocks should not be exposed to acidic agents, even if protected with MAX PROTECTION). 

Undiluted product.

For maximum effect, MAX PROTECTION + should preferably be used over MAX PROTECTION with this system the substrate becomes highly stain resistant.
The surface of the material must be dry, polished, brushed and or rough, free of dust and contaminants. Do not heat the material before application.
The substrate becomes resistant to staining agents after 24 hours of application.

APPLICATION (PROFESSIONAL USE)

With the finished sheets or pieces horizontally, use a foam thrower, airless gun or hand sprayer applying one coat on the face and edges of the materials, with sufficient amount to wet the substrate. Let it act for at least 30 minutes and remove the excess with a cardboard disc sander, wool bonnet or cotton rag.


MAINTENANCE

It is recommended the removal and cleaning of the staining agent as soon as possible, as soon as the incident occurs. Remove the excess of dirt with paper towels, then wipe off with neutral detergent or abrasive paste (CIF), wash it with water to remove excess and dry the surface.

Exceptions must be followed, tested, evaluated and subsequently approved by the TDS Company technical staff. 

Approximately total of 20 to 250 sq.ft per room.
PERFORMANCE INFORMATION ONLY ORIENTATIVE.
The numbers may vary depending on the accessory used, the porosity of the material, the degree of absorption of the coating and the technique used.

* PENETRATES AND INTERACTS CHEMICALLY WITH THE ROCK
* ALLOWS ROCK TO BREATHE
* AVOIDS EFFLORESCENCE
* PROMOTES AN INVISIBLE PROTECTION COAT
* HIGH RESISTANCE TO ACTION OF UV RAYS
* MAKES THE SURFACE REPELLENT TO HYDRO-OIL
* PROTECTS WITHOUT CHANGING THE COLOR
* PREVENTS DIRT ACCUMULATION
  

Mobirise

INSIDE MAX 500 

INSIDE MAX 500 is a two-component water repellent suitable for the treatment of granites, marbles and other natural stones. It enhances color and luster and corrects micro-cracks, ensuring a permanent wet effect. It does not create a layer and has high resistance to ultraviolet rays.

Undiluted product.

The surface of the material must be polished or brushed, dry, free of dust and contaminants. Do not heat the material before application

MANUAL APPLICATION

Use foam trowel or cotton rag. Apply one coat to the surface in sufficient amount to wet the entire substrate (no excesses in order to not turn the removal too difficult). Let it act for at least 10 minutes. Remove product excess with a cardboard disc sander or bonnet and on brushed materials make a second application.


POLISHER APPLICATION:

By dripping. Adjust the polisher spray so that all the material gets wet, but without leaving excess of the product, after that, use the brushes

Exceptions must be followed, tested, evaluated and subsequently approved by the TDS Company technical staff. 

Average of 55 to 110M² per liter with one coat.
YIELD INFORMATION ONLY FOR ORIENTATION PURPOSES.
The numbers may vary depending on the accessory used, the porosity of the material, the degree of absorption of the coating and the technique used.

* PENETRATES AND INTERACTS CHEMICALLY WITH THE ROCK
* IT DOES NOT HIT THE SUBSTRATE
* COLOR INTENSIFIER
* WATER REPELLENT 

Mobirise
Address

Rod: Gumercino Moura Nunes SN,  km 02,  Village da Luz Cep: 29309-362
Cx Postal: 248 Cep: 29300970
Cachoeiro de Itapemrim / ES

Contact

Email: innovare@innovare.ind.br
Telefone: +55 28 3511-6666/ 3518-9448 / 3515-0057

   

Links

Work with us  
Privacy policy